AIDA CAMERA

UHD6G-X12L 4K/UHD 6G-SDI EFP Camera

AIDA CONVERTER

GCON-SDI SDI to Genlock SDI/HDMI Converter

AIDA VISCA CONTROL

CCS-USB VISCA Camera Control Unit & Software

AIDA LENS

CS Mount 2.8mm Fixed Focal Mega-Pixel Lens

CAMERA

AIDA AIDA4K EFP Zoom Camera – Professional 12X Zoom EFP Camera

UHD6G-X12L is a professional 4K EFP camera solution that houses a superior 12X 4K lens zoom module. The UHD6G-X12L features a 1/1.7 Progressive Scan CMOS image sensor capable of 4K (4096 x 2160) with significantly enhanced imaging characteristics including sensitivity and low noise under low light conditions. Powered by a back-illuminated pixel technology, the UHD6G-X12L realizes 4K high picture quality in the visible light with wide dynamic range. The UHD6G-X12L is robust in its physical features with expanded control sets via VISCA protocol, audio and dual video (6G-SDI & HDMI 1.4) simultaneous output interfaces. Designed for versatility, durability, and cost effectiveness for a smooth integration into any broadcast, professional or corporate AV environment.

CONVERTER

THE PERFECT CAMERA SIDEKICK – Professional SDI Genlock Converter

GCON-SDI converts SDI/3G-SDI sources to Genlock SDI/3G-SDI and HDMI with zero latency, keeping the integrity of the original source feed intact. GCON-SDI supports 1080p resolutions up to 60 fps. The Tri-Level Sync Genlock featured in the GCON-SDI syncs with other system components for seamless vertical interval switching between sources. GCON-SDI supports ancillary data in both SMPTE 352 payload ID and audio and relays it through its SDI output. Its rugged and portable design makes GCON-SDI a perfect camera sidekick to where it’s needed most.

LENS

The CS-Mount 12mm Fixed Focal Megapixel Lens from AIDA is optimized with the AIDA Imaging GEN Series cameras with 1/3″ Progressive CMOS sensors.

VISCA CONTROL

SMALL BUT MIGHTY – One CCS to control them all

The CCS-USB camera control unit and software for PC features multi serial port control, making this the go-to software for all your camera control needs. Simply connect the control unit to your computer via USB, then connect your camera to its onboard RS232, RS485 or RS422 and the software will automatically set up your COM ports. Control up to 7 primary cameras utilizing advanced SONY VISCA™ protocol and up to 255 cameras utilizing PELCO™ protocol. Compatible with Windows and Mac OSX™ operating systems. Includes an RS232 to Cross-RJ45 converter for longer communication relays when you need it most. The camera control unit is designed for mobility and versatility. Its compact in size and rugged design truly makes the CCS-USB small but mighty and the one CCS to control them all.

Technology for Broadcast & Video Production Live

Powerful Solutions for Broadcasters and Integrators TV

Pin It on Pinterest

Share This